Fix sphinx warnings
Signed-off-by: Jonathon Anderson <janderson@ciq.com>
This commit is contained in:
Jonathon Anderson
@@ -1,165 +0,0 @@
|
||||
================================
|
||||
EL7 Quickstart (CentOS and RHEL)
|
||||
================================
|
||||
|
||||
Install Warewulf and dependencies
|
||||
=================================
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo yum install -y golang tftp-server dhcp nfs-utils
|
||||
|
||||
git clone https://github.com/warewulf/warewulf.git
|
||||
cd warewulf
|
||||
make all
|
||||
sudo make install
|
||||
|
||||
Configure firewalld
|
||||
===================
|
||||
|
||||
Restart firewalld to register the added service file, add the service
|
||||
to the default zone, and reload.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo systemctl restart firewalld
|
||||
sudo firewall-cmd --permanent --add-service warewulf
|
||||
sudo firewall-cmd --permanent --add-service nfs
|
||||
sudo firewall-cmd --permanent --add-service tftp
|
||||
sudo firewall-cmd --reload
|
||||
|
||||
Configure the controller
|
||||
========================
|
||||
|
||||
Edit the file ``/etc/warewulf/warewulf.conf`` and ensure that you've
|
||||
set the appropriate configuration parameters. Here are some of the
|
||||
defaults for reference assuming that ``192.168.200.1`` is the IP
|
||||
address of your cluster's private network interface:
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
WW_INTERNAL: 43
|
||||
ipaddr: 192.168.200.1
|
||||
netmask: 255.255.255.0
|
||||
network: 192.168.200.0
|
||||
warewulf:
|
||||
port: 9873
|
||||
secure: false
|
||||
update interval: 60
|
||||
autobuild overlays: true
|
||||
host overlay: true
|
||||
syslog: false
|
||||
dhcp:
|
||||
enabled: true
|
||||
range start: 192.168.200.50
|
||||
range end: 192.168.200.99
|
||||
systemd name: dhcpd
|
||||
tftp:
|
||||
enabled: true
|
||||
systemd name: tftp
|
||||
nfs:
|
||||
enabled: true
|
||||
export paths:
|
||||
- path: /home
|
||||
export options: rw,sync
|
||||
mount options: defaults
|
||||
mount: true
|
||||
- path: /opt
|
||||
export options: ro,sync,no_root_squash
|
||||
mount options: defaults
|
||||
mount: false
|
||||
systemd name: nfs-server
|
||||
container mounts:
|
||||
- source: /etc/resolv.conf
|
||||
dest: /etc/resolv.conf
|
||||
readonly: true
|
||||
|
||||
.. note::
|
||||
|
||||
The DHCP range ends at ``192.168.200.99`` and as you will see
|
||||
below, the first node static IP address (post boot) is configured
|
||||
to ``192.168.200.100``.
|
||||
|
||||
Start and enable the Warewulf service
|
||||
=====================================
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
# Start and enable the warewulfd service
|
||||
sudo systemctl enable --now warewulfd
|
||||
|
||||
Configure system services automatically
|
||||
=======================================
|
||||
|
||||
There are a number of services and configurations that Warewulf relies
|
||||
on to operate. If you wish to configure all services, you can do so
|
||||
individually (omitting the ``--all``) will print a help and usage
|
||||
instructions.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo wwctl configure --all
|
||||
|
||||
.. note::
|
||||
|
||||
If you just installed the system fresh and have SELinux enforcing,
|
||||
you may need to reboot the system at this stage to properly set the
|
||||
contexts of the TFTP contents. After rebooting, you might also need
|
||||
to run ``restorecon -Rv /var/lib/tftpboot/`` if there are
|
||||
errors with TFTP still.
|
||||
|
||||
Pull and build the VNFS container and kernel
|
||||
============================================
|
||||
|
||||
This will pull a basic VNFS container from Docker Hub and import the
|
||||
default running kernel from the controller node and set both in the
|
||||
"default" node profile.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo wwctl container import docker://ghcr.io/warewulf/warewulf-centos:7 centos-7 --setdefault
|
||||
sudo wwctl kernel import $(uname -r) --setdefault
|
||||
|
||||
Set up the default node profile
|
||||
===============================
|
||||
|
||||
The ``--setdefault`` arguments above will automatically set those
|
||||
entries in the default profile, but if you wanted to set them by hand
|
||||
to something different, you can do the following:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo wwctl profile set -y default -K $(uname -r) -C centos-7
|
||||
|
||||
Next we set some default networking configurations for the first
|
||||
ethernet device. On modern Linux distributions, the name of the device
|
||||
is not critical, as it will be setup according to the HW
|
||||
address. Because all nodes will share the netmask and gateway
|
||||
configuration, we can set them in the default profile as follows:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo wwctl profile set -y default --netdev eth0 --netmask 255.255.255.0 --gateway 192.168.200.1
|
||||
sudo wwctl profile list
|
||||
|
||||
Add a node
|
||||
==========
|
||||
|
||||
Adding nodes can be done while setting configurations in one
|
||||
command. Here we are setting the IP address of ``eth0`` and setting
|
||||
this node to be discoverable, which will then automatically have the
|
||||
HW address added to the configuration as the node boots.
|
||||
|
||||
Node names must be unique. If you have node groups and/or multiple
|
||||
clusters, designate them using dot notation.
|
||||
|
||||
Note that the full node configuration comes from both cascading
|
||||
profiles and node configurations which always supersede profile
|
||||
configurations.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
sudo wwctl node add n0000.cluster --ipaddr 192.168.200.100 --discoverable true
|
||||
sudo wwctl node list -a n0000
|
||||
|
||||
Turn on your compute node and watch it boot!
|
||||
Reference in New Issue
Block a user