#!/bin/bash

error_exit() {
    echo "ERROR: $*"
    exit 1
}

export PATH=/usr/bin:/bin:/usr/sbin:/sbin

IP="{{$.Self.IpmiIpaddr}}"
NETMASK="{{$.Self.NetDevs.eth0.Netmask}}"
GATEWAY="{{$.Self.NetDevs.eth0.Gateway}}"
USER="{{$.Self.IpmiUserName}}"
PASS="{{$.Self.IpmiPassword}}"

echo IP is $IP
echo NETMASK is $NETMASK
echo GATEWAY is $GATEWAY
echo USER is $USER
echo PASS is $PASS

if [ -z "$IP" ]; then
    error_exit "No IPMI IP address supplied, skipping IPMI configuration"
fi

modprobe ipmi_si
modprobe ipmi_ssif
modprobe ipmi_devintf
modprobe ipmi_msghandler

if [ ! -e /dev/ipmi0 ]; then
    sleep 1
    ipmi_dev=$(grep ipmidev /proc/devices | awk '{ print $1; }')
    mknod -m 0666 /dev/ipmi0 c $ipmi_dev 0
    ls -la /dev/ipmi0
fi

# Network
ipmitool lan set 1 access on
ipmitool lan set 1 ipsrc static
ipmitool lan set 1 ipaddr $IP
ipmitool lan set 1 netmask $NETMASK
ipmitool lan set 1 defgw ipaddr $GATEWAY

# User
if [ "$USER" != "" ]; then
    ipmitool user set name 2 $USER
    ipmitool user set password 2 $PASS
    sleep 1
    ipmitool user priv 2 4 1
    ipmitool user enable 2
fi

# Authentication
#ipmitool lan set 1 auth user md5,password
#ipmitool lan set 1 auth operator md5,password
#ipmitool lan set 1 auth admin md5,password
#ipmitool user enable 1
#ipmitool user priv 1 4 1

# Authentication (allow None)
#ipmitool lan set 1 auth user none,md5,password
#ipmitool lan set 1 auth operator none,md5,password
#ipmitool lan set 1 auth admin none,md5,password
#ipmitool user enable 1
#ipmitool user priv 1 4 1

# Serial Over LAN
ipmitool sol set force-encryption true 1
ipmitool sol set force-authentication true 1
ipmitool sol set privilege-level admin 1
ipmitool sol payload enable 1 4
ipmitool sol set enabled true 1
ipmitool sol set non-volatile-bit-rate 19.2 1
ipmitool sol set volatile-bit-rate 19.2 1