==================== Container Management ==================== Since the inception of Warewulf over 20 years ago, Warewulf has used the model of the "Virtual Node File System" (VNFS) as a template image for the compute nodes. This is similar to a golden master image, except that the node file system exists within a directory on the Warewulf control node (e.g. a ``chroot()``). In hindsight, we've been using containers all along, but the buzzword just didn't exist. Over the last 5-6 years, the enterprise has created a lot of tooling and standards around defining, building, distributing, securing, and managing containers, so Warewulf (as of v4.0) now integrates directly within the container ecosystem to facilitate the process of VNFS image management. If you are not currently leveraging the container ecosystem in any other way, you can still build your own chroot directories and use Warewulf as you always have. It is important to understand that Warewulf is not running a container runtime on the nodes. While that is absolutely possible to run containers from the booted hosts, Warewulf is provisioning the container image to the bare metal and booting it. This container will be used as the base operating system and by default it will run stateless in memory. This means when you reboot the node, the node persists no information about Warewulf or how it booted. Container Tools =============== There are different container managment tools available. Docker is probably the most recognizable one in the enterprise. Podman is another one that is gaining traction on the RHEL platforms. In HPC, Apptainer is the most utilized container management tool. You can use any of these to create and manage the containers to be later imported into Warewulf. Importing From A Registry ========================= Warewulf supports importing an image from any OCI compliant registry. This means you can import from a public registry or from a private registry. Here is an example of importing from Docker Hub. .. code-block:: console # wwctl container import docker://ghcr.io/hpcng/warewulf-rockylinux:8 rocky-8 Getting image source signatures Copying blob d7f16ed6f451 done Copying config da2ca70704 done Writing manifest to image destination Storing signatures [LOG] info unpack layer: sha256:d7f16ed6f45129c7f4adb3773412def4ba2bf9902de42e86e77379a65d90a984 Updating the container's /etc/resolv.conf Building container: rocky-8 .. note:: Most containers in Docker Hub are not "bootable", in that, they have a limited version of Systemd to make them lighter weight for container purposes. For this reason, don't expect any base Docker container (e.g. ``docker://rockylinux`` or ``docker://debian``) to boot properly. They will not, as they will get stuck into a single user mode. The containers in `https://hub.docker.com/u/warewulf `_ are not limited and thus they boot as you would expect. Private Registry ---------------- It is possible to use a private registry that is password protected or does not have the requirement for TLS. In order to do so, you have two choices for handling the credentials. * Set environmental variables * Use ``docker login`` or ``podman login`` which will store the credentials locally Please note, there is no requirement to install and use docker or podman on your control node just for importing images into Warewulf. Here are the environmental variables that can be used. .. code-block:: console WAREWULF_OCI_USERNAME WAREWULF_OCI_PASSWORD WAREWULF_OCI_NOHTTPS Here is an example: .. code-block:: console # export WAREWULF_OCI_USERNAME=privateuser # export WAREWULF_OCI_PASSWORD=super-secret-password-or-token # wwctl import docker://ghcr.io/privatereg/rocky:8 The above is just an example. Consideration should be done before doing it this way if you are in a security sensitive environment or shared environments. You would not want these showing up in bash history or logs. Syncuser -------- At import time Warewulf checks if the names of the users on the host match the users and UIDs/GIDs in the imported container. If there is mismatch, the import command will print out a warning. By setting the ``--syncuser`` flag you advise Warewulf to try to syncronize the users from the host to the container, which means that ``/etc/passwd`` and ``/etc/group`` of the imported container are updated and all the files belonning to these UIDs and GIDs will also be updated. A check if the users of the host and container matches can be triggered with the ``syncuser`` command. .. code-block:: console # wwctl container syncuser container-name With the ``--write`` flag it will update the container to match the user database of the host as described above. .. code-block:: console wwctl container syncuser --write container-name Listing All Imported Containers =============================== Once the container has been imported, you can list them all with the following command: .. code-block:: console # wwctl container list CONTAINER NAME BUILT NODES rocky-8 true 0 Once a container has been imported and showing up in this list you can configure it to boot compute nodes. Making Changes To Containers ============================ Warewulf has a minimal container runtime built into it. This means you can run commands inside of any of the containers and make changes to them as follows: .. code-block:: console # wwctl container exec rocky-8 /bin/sh [rocky-8] Warewulf> cat /etc/rocky-release Rocky Linux release 8.4 (Green Obsidian) [rocky-8] Warewulf> exit Rebuilding container... [INFO] Skipping (VNFS is current) You can also ``--bind`` directories from your host into the container when using the exec command. This works as follows: .. code-block:: console # wwctl container exec --bind /tmp:/mnt rocky-8 /bin/sh [rocky-8] Warewulf> .. note:: As with any mount command, both the source and the target must exist. This is why the example uses the ``/mnt/`` directory location, as it is almost always present and empty in every Linux distribution (as prescribed by the LSB file hierarchy standard). When the command completes, if anything within the container changed, the container will be rebuilt into a bootable static object automatically. If the files ``/etc/passwd`` or ``/etc/group`` were updated, there will be an additional check to confirm if the users are in sync as described in `Syncuser`_ section. Creating Containers From Scratch ================================ You can also create containers from scratch and import those containers into Warewulf as previous versions of Warewulf did. Building A Container From Your Host ----------------------------------- RPM based distributions, as well as Debian variants can all bootstrap mini ``chroot()`` directories which can then be used to bootstrap your node's container. For example, on an RPM based Linux distribution with YUM or DNF, you can do something like the following: .. code-block:: console # yum install --installroot /tmp/newroot basesystem bash \ chkconfig coreutils e2fsprogs ethtool filesystem findutils \ gawk grep initscripts iproute iputils net-tools nfs-utils pam \ psmisc rsync sed setup shadow-utils rsyslog tzdata util-linux \ words zlib tar less gzip which util-linux openssh-clients \ openssh-server dhclient pciutils vim-minimal shadow-utils \ strace cronie crontabs cpio wget rocky-release ipmitool yum \ NetworkManager You can do something similar with Debian-based distributions: .. code-block:: console # apt-get install debootstrap # debootstrap stable /tmp/newroot http://ftp.us.debian.org/debian Once you have created and modified your new ``chroot()``, you can import it into Warewulf with the following command: .. code-block:: console # wwctl container import /tmp/newroot containername Building A Container Using Apptainer ------------------------------------ Apptainer, a container platform for HPC and performance intensive applications, can also be used to create node containers for Warewulf. There are several Apptainer container recipes in the ``containers/Apptainer/`` directory and can be found on GitHub at `https://github.com/hpcng/warewulf/tree/main/containers/Apptainer `_. You can use these as starting points and adding any additional steps you want in the ``%post`` section of the recipe file. Once you've done that, installing Apptainer, building a container sandbox and importing into Warewulf can be done with the following steps: .. code-block:: console # yum install epel-release # yum install Apptainer # Apptainer build --sandbox /tmp/newroot /path/to/Apptainer/recipe.def # wwctl container import /tmp/newroot containername Building A Container Using Podman --------------------------------- You can also build a container using podman via a ``Dockerfile``. For this step the container must be exported to a tar archive, which then can be imported to Warewulf. The following steps will create an openSUSE Leap container and import it to Warewulf: .. code-block:: console # podman build -f containers/Docker/openSUSE/Containerfile --tag leap-ww # podman save localhost/leap-ww:latest -o ~/leap-ww.tar # wwctl container import file://root/leap-ww.tar leap-ww