273 lines
8.8 KiB
ReStructuredText
273 lines
8.8 KiB
ReStructuredText
==================
|
|
Provisioning disks
|
|
==================
|
|
|
|
As a tech preview, Warewulf provides structures to define disks, partitions, and
|
|
file systems. These structures can generate a configuration for `Ignition`_ to
|
|
provision partitions and file systems dynamically on cluster nodes, or with
|
|
sfdisk, mkfs, and mkswap during boot.
|
|
|
|
.. _Ignition: https://coreos.github.io/ignition/
|
|
|
|
Ignition can, for example, create ``swap`` partitions or ``/scratch`` file
|
|
systems.
|
|
|
|
.. note::
|
|
|
|
Warewulf is not currently able to provision the node image onto an explicitly
|
|
provisioned root file system.
|
|
|
|
Requirements
|
|
============
|
|
|
|
Partition and file system creation requires both ``ignition`` and ``sgdisk`` to
|
|
be installed in the image.
|
|
|
|
Rocky Linux
|
|
-----------
|
|
|
|
.. code-block:: shell
|
|
|
|
dnf install ignition gdisk
|
|
|
|
.. note::
|
|
|
|
Packages for Ignition are not currently available for Rocky Linux 8, but it
|
|
is available for Rocky Linux 9 as part of "appstream."
|
|
|
|
openSuse Leap
|
|
-------------
|
|
|
|
.. code-block:: shell
|
|
|
|
zypper install ignition gptfdisk
|
|
|
|
Disks and partitions
|
|
====================
|
|
|
|
A node or profile can have several disks. Each disk is identified by the path to
|
|
its block device. Each disk holds a map to its partitions and a ``bool`` switch
|
|
to indicate if an existing, non-matching partition table should be overwritten.
|
|
|
|
Each partition is identified by its label. The partition number can be omitted,
|
|
but specifying it is recommended as Ignition may fail without it. Partition
|
|
sizes should also be set (specified in MiB), except for the last partition: if
|
|
no size is given, the maximum available size is used. Each partition has the
|
|
switches ``should_exist`` and ``wipe_partition_entry`` which control the
|
|
partition creation process (via the ``--partcreate`` and ``--partwipe`` flags).
|
|
When omitting a partition number the `wipe_partition_entry` should be true, as
|
|
this allows ignition to replace the existing partition.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set n1 \
|
|
--diskname /dev/vda --diskwipe \
|
|
--partname scratch --partcreate --partwipe --partnumber 1
|
|
|
|
File systems
|
|
============
|
|
|
|
File systems are identified by their underlying block device, preferably using
|
|
the ``/dev/by-partlabel`` format. Except for a ``swap`` partition, an absolute
|
|
path for the mount point must be specified for each file system. Depending on
|
|
the image used, valid formats are ``btrfs``, ``ext3``, ``ext4``, and ``xfs``.
|
|
Each file system has the switch ``wipe_filesystem`` to control whether an
|
|
existing file system is wiped.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set n1 \
|
|
--diskname /dev/vda --partname scratch \
|
|
--fsname scratch --fsformat btrfs --fspath /scratch
|
|
|
|
Boot-time configuration
|
|
=======================
|
|
|
|
Ignition uses systemd, as the underlying ``sgdisk`` command relies on dbus
|
|
notifications.
|
|
|
|
|
|
1. ``ignition-disks-ww4.service`` uses Ignition to create the specified
|
|
partitions and file systems.
|
|
|
|
2. ``ww4-disks.target`` depends on a matching ``.mount`` unit for each
|
|
mounted file system.
|
|
|
|
3. Each ``.mount`` creates the necessary mount points in the root file system
|
|
and mounts the provisioned file systems during boot.
|
|
|
|
These services and mount units are generated by the ``ignition`` overlay and
|
|
depend on the existence of the file ``/warewulf/ignition.json``, also generated
|
|
by the ``ignition`` overlay.
|
|
|
|
Example disk configurations
|
|
===========================
|
|
|
|
This command formats a btrfs file system on a "scratch" partion of
|
|
"vda" and mounts it at ``/scratch``.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set n1 \
|
|
--diskname /dev/vda --diskwipe \
|
|
--partname scratch --partcreate --partnumber 1 \
|
|
--fsname scratch --fsformat btrfs --fspath /scratch
|
|
|
|
This command adds a swap partition to the "vda" disk.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set n1 \
|
|
--diskname /dev/vda \
|
|
--partname swap --partsize=1024 --partnumber 2 \
|
|
--fsname swap --fsformat swap --fspath swap
|
|
|
|
Re-using or wiping disks
|
|
========================
|
|
|
|
For empty disks the desired configuration is created and the filesystems are
|
|
mounted. If partitions or file systems already exist on the disk, ``ignition``
|
|
tries to reuse existing file systems by default.
|
|
|
|
To ignore existing file systems and provision fresh file systems on each boot,
|
|
specify the ``--fswipe`` flag for that filesystem, and ``--diskwipe`` for the
|
|
disk, as necessary.
|
|
|
|
If you would like to re-use existing partitions but want to replace existing
|
|
file systems once, you may
|
|
|
|
* wipe the existing data with tools like ``wipefs`` or `dd` [#]_; or
|
|
* set the ``--fswipe`` flag and remove it after one reboot.
|
|
|
|
.. [#] With ``wipefs`` you have to remove the filesystem *and* parition
|
|
information. E.g., use ``wipefs -fa /dev/vda*`` to remove all file system
|
|
information and partition information.
|
|
|
|
See the `upstream ignition documentation`_ for additional information.
|
|
|
|
.. _upstream ignition documentation: https://coreos.github.io/ignition/operator-notes/#filesystem-reuse-semantics
|
|
|
|
|
|
.. _provision to disk:
|
|
|
|
Provision to disk
|
|
=================
|
|
|
|
*New in Warewulf v4.6.2*
|
|
|
|
As a tech preview, the Warewulf two-stage boot process can provision the node
|
|
image to local storage.
|
|
|
|
.. warning::
|
|
|
|
This functionality is a technology preview and should be used with care. Pay
|
|
specific attention to ``wipeFilesytem`` and similar settings.
|
|
|
|
.. note::
|
|
|
|
Warewulf doesn't install a bootloader to the disk or add UEFI entries. Nodes
|
|
still request an image and configuration from the Warewulf server on every
|
|
boot.
|
|
|
|
.. note::
|
|
|
|
While provisioning to disk should be possible during a single-stage boot, not
|
|
all features are available:
|
|
|
|
- Warewulf does not perform hardware detection to ensure that necessary
|
|
kernel modules are loaded prior to init.
|
|
- Warewulf does not load udev to ensure that ``/dev/disk/by-*`` symlinks are
|
|
available prior to init.
|
|
|
|
With Ignition
|
|
-------------
|
|
|
|
Warewulf needs a prepared file system to deploy the image to. Warewulf can
|
|
provision this file system using Ignition. To use Ignition, include ``ignition``
|
|
in your system overlay. The ignition overlay provisions disks during init and,
|
|
optionally, during the first stage of a two-stage boot. This allows the
|
|
root file system to be provisioned before the image is loaded.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set wwnode1 \
|
|
--diskname /dev/vda --diskwipe \
|
|
--partname rootfs --partcreate --partnumber 1 \
|
|
--fsname rootfs --fsformat ext4 --fspath /
|
|
|
|
In order to allow Dracut to provision the disk, partition, and file system,
|
|
Ignition must be included in the Dracut image.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl image exec rockylinux-9 -- /usr/bin/dracut --force --no-hostonly --add wwinit --add ignition --regenerate-all
|
|
|
|
The necessary file system may alternatively be prepared out-of-band.
|
|
|
|
With sfdisk and mkfs
|
|
--------------------
|
|
|
|
Systems that do not have access to Ignition (e.g., Rocky Linux 8) can provision
|
|
the root file system using a combination of ``sfdisk`` and ``mkfs``. To use
|
|
them, include ``sfdisk`` and ``mkfs`` in your system overlay. The ``sfdisk`` and
|
|
``mkfs`` overlays provision disk and file systems during the first stage of a
|
|
two-stage boot. This allows the root file system to be provisioned before the
|
|
image is loaded.
|
|
|
|
Configure the ``sfdisk`` and ``mkfs`` overlays using resources:
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set wwnode1 \
|
|
--diskname /dev/vda --diskwipe \
|
|
--partname rootfs --partcreate --partnumber 1 \
|
|
--fsname rootfs --fsformat ext4 --fspath /
|
|
|
|
In order to allow Dracut to provision the disk, partition, and file system, some
|
|
additional commands must be included in the Dracut image, depending on which
|
|
functionality is used:
|
|
|
|
- **sfdisk:** writes the partition table
|
|
|
|
- **blockdev:** used to re-read the partition table after writing
|
|
|
|
- **udevadm:** used to trigger udev events after writing the partition table
|
|
|
|
- **mkfs:** formats file systems (may also require file-system-specific commands like mkfs.ext4)
|
|
|
|
- **mkfs.ext4**, **mkfs.btrfs**, etc: used by mkfs to format specific file systems
|
|
|
|
- **wipefs:** used to determine if a file system already exists
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl image exec rockylinux-8 -- /usr/bin/dracut --force --no-hostonly \
|
|
--add wwinit \
|
|
--install sfdisk \
|
|
--install blockdev \
|
|
--install udevadm \
|
|
--install mkfs \
|
|
--install mkfs.ext4 \
|
|
--install wipefs \
|
|
--regenerate-all
|
|
|
|
Configuring the root device
|
|
---------------------------
|
|
|
|
Set the desired storage device for the node image using the ``--root``
|
|
parameter.
|
|
|
|
.. code-block:: shell
|
|
|
|
wwctl node set wwnode1 --root /dev/disk/by-partlabel/rootfs
|
|
|
|
|
|
Known Problems
|
|
--------------
|
|
|
|
If the partition table on the disk isn't properly readable the command ``sgdisk
|
|
--zap-all`` (which is used by Ignition to wipe the partition table) returns with
|
|
code ``2``. This is interpreted by Ignition < ``2.16.2`` as an error, and no
|
|
partitions or filesystems are created. Since the partition table is still wiped,
|
|
partitioning and formatting should succeed on the next boot.
|