Merge pull request #1234 from anderbubble/troubleshooting-guide

New troubleshooting guide

CHANGELOG.md

@@ -52,6 +52,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
 ### Added
 
 - Added `--syncuser` flag to `wwctl container shell`. #1358
+- Added a troubleshooting guide. #1234
 
 ### Changed
 

userdocs/contents/troubleshooting.rst

@@ -0,0 +1,109 @@
+Troubleshooting
+===============
+
+iPXE
+----
+
+If you're using iPXE to boot (the default), you can get a command prompt by pressing with C-b during boot.
+
+From the iPXE command prompt, you can run the same commands from `default.ipxe`_ (or `dracut.ipxe`_) to troubleshoot potential boot problems.
+
+.. _default.ipxe: https://github.com/warewulf/warewulf/blob/main/etc/ipxe/default.ipxe
+
+.. _dracut.ipxe: https://github.com/warewulf/warewulf/blob/main/etc/ipxe/dracut.ipxe
+
+For example, the following commands perform a (relatively) normal Warewulf boot.
+(Substitute your Warewulf server's IP address in place of 10.0.0.1,
+update the port number if you have changed it from the default of 9873,
+and substitute your cluster node's MAC addres in place of 00:00:00:00:00:00.)
+
+.. code-block::
+
+   set uri http://10.0.0.1:9873/provision/00:00:00:00:00:00
+   kernel --name kernel ${uri}?stage=kernel
+   imgextract --name container ${uri}?stage=container&compress=gz
+   imgextract --name system ${uri}?stage=system&compress=gz
+   imgextract --name runtime ${uri}?stage=runtime&compress=gz
+   boot kernel initrd=container initrd=kmods initrd=system initrd=runtime
+
+- The ``uri`` variable points to ``warewulfd`` for future reference.
+  This includes the cluster node's MAC address so that Warewulf knows what container and overlays to provide.
+
+- The ``kernel`` command fetches a kernel for later booting.
+
+- The ``imgextract`` command fetches and decompresses the images that will make up the booted noe image.
+  In a typical environment this is used to load a minimal "initial ramdisk" which, then, boots the rest of the system.
+  Warewulf, by default, loads the entire image as an initial ramdisk,
+  and also loads the system and runtime overlays at this time time.
+
+- The ``boot`` command tells iPXE to boot the system with the given kernel and ramdisks.
+
+.. note::
+
+   This example does not provide ``assetkey`` information to ``warewulfd``.
+   If your nodes have defined asset tags, provide it in the ``uri`` variable for the node you are trying to boot.
+
+For example, you may want to try booting to a pre-init shell with debug logging enabled.
+To do so, substitute the ``boot`` command above.
+
+.. code-block::
+
+   boot kernel initrd=container initrd=kmods initrd=system initrd=runtime rdinit=/bin/sh
+
+.. note::
+
+   You may be more familiar with specifying ``init=`` on the kernel command line.
+   ``rdinit`` indicates "ramdisk init."
+   Since Warewulf, by default, boots the node image as an initial ramdisk, we must use ``rdinit=`` here.
+
+GRUB
+----
+
+If you're using GRUB to boot, you can get a command prompt by pressing "c" when prompted during boot.
+
+From the GRUB command prompt, you can enter the same commands that you would otherwise find in `grub.cfg.ww`_.
+
+.. _grub.cfg.ww: https://github.com/warewulf/warewulf/blob/main/etc/grub/grub.cfg.ww
+
+For example, the following commands perform a (relatively) normal Warewulf boot.
+(Substitute your Warewulf server's IP address in place of 10.0.0.1,
+and update the port number if you have changed it from the default of 9873.)
+
+.. code-block::
+
+   uri="(http,10.0.0.1:9873)/provision/${net_default_mac}"
+   linux "${uri}?stage=kernel" wwid=${net_default_mac}
+   initrd "${uri}?stage=container&compress=gz" "${uri}?stage=system&compress=gz" "${uri}?stage=runtime&compress=gz"
+   boot
+
+- The ``uri`` variable points to ``warewulfd`` for future reference.
+  ``${net_default_mac}`` provides Warewulf with the MAC address of the booting node,
+  so that Warewulf knows what container and overlays to provide it.
+
+- The ``linux`` command tells GRUB what kernel to boot, as provided by ``warewulfd``.
+  The ``wwid`` kernel argument helps ``wwclient`` identify the node during runtime.
+
+- The ``initrd`` command tells GRUB what images to load into memory for boot.
+  In a typical environment this is used to load a minimal "initial ramdisk" which, then, boots the rest of the system.
+  Warewulf, by default, loads the entire image as an initial ramdisk,
+  and also loads the system and runtime overlays at this time time.
+
+- The ``boot`` command tells GRUB to boot the system with the previously-defined configuration.
+
+.. note::
+
+   This example does not provide ``assetkey`` information to ``warewulfd``.
+   If your nodes have defined asset tags, provide it in the ``uri`` variable for the node you are trying to boot.
+
+For example, you may want to try booting to a pre-init shell with debug logging enabled.
+To do so, substitute the ``linux`` command above.
+
+.. code-block::
+
+   linux "${uri}?stage=kernel" wwid=${net_default_mac} debug rdinit=/bin/sh
+
+.. note::
+
+   You may be more familiar with specifying ``init=`` on the kernel command line.
+   ``rdinit`` indicates "ramdisk init."
+   Since Warewulf, by default, boots the node image as an initial ramdisk, we must use ``rdinit=`` here.

userdocs/index.rst

@@ -28,6 +28,7 @@ Welcome to the Warewulf User Guide!
    Security <contents/security>
    Templating <contents/templating>
    dnsmasq <contents/dnsmasq>
+   Troubleshooting <contents/troubleshooting>
 
 .. toctree::
    :maxdepth: 2